Reset filter
HighQSil® LFO
The newly developed BIW Silicone series HighQSil® LFO reduces streaking on glass surfaces. The insulating material thus reduces an aesthetic annoyance and can also provide greater safety on the road. When non-volatile components made of silicone de-gas and meet cooler surfaces, this can result in...
HighQSil® PT / PT X
From our specially developed HighQSil® range:
our platinum vulcanised grade HighQSil® PT has an improved tensile strength and tear resistance as well as elongation at break compared to the peroxide vulcanised grade HighQSil HIT®, which are topped again by our grade HighQSil® PT X. ...
HighQSil® FR Railway 50
New in our HighQSil® range - HighQSil® FR Railway 50 meets the requirements of DIN EN 45545-2 R22/R23: HL3...
HighQSil® FR Railway 70
New in our HighQSil® range - HighQSil® FR Railway 70 meets the requirements of DIN EN 45545-2 R22/R23: HL3....
HighQSil® FR Railway Sponge 035
New in our HighQSil® range - HighQSil® FR Railway Sponge 035 meets the requirements of DIN EN 45545-2 R22/R23: HL3
...
HighQSil® FR Railway Sponge 055
New in our HighQSil® range - HighQSil® FR Railway Sponge 055 meets the requirements of DIN EN 45545-2 R22/R23: HL3
...
HighQSil® HIT
From our specially developed HighQSil® series: our peroxide vulcanised grade HighQSil® HIT has an improved tensile strength and tear resistance compared to the standard peroxide mixture, which is only topped by our platinum vulcanised grades HighQSil® types PT and PT X....
HighQSil® PT Sponge
Extension of our HighQSil® range - BfR/FDA foam quality...
LFS-Treatment
Many silicone components, because of their surface condition, tend toward stickiness and adhesion of dust. This disadvantage sharply limits their
application and/or use. The sticky and adhesion-prone surfaces of the components need to be lower in friction and cleaner!...
Magnetic silicone
Silicone rubber for adhesion to magnetic material where silicone-typical properties are required.
Counterpart to profiles with integrated magnetic strip
Execution as hose, profile and moulded part
Magnetic properties limited adjustable...
SANIBIW
Articles made of silicone rubber for applications in the sanitary area
Hoses from 6 to 25 mm inner diameter
Tested according to the KTW guideline of the (German) Federal Environmental Bureau
Tested according to DVGW W270
Tested according to BS 6920 (WRAS)
Tested...
Silicone metallic and fluorescent colours
Many colours with metallic effect
Individual colour adjustment possible
Fluorescent colours in yellow/green tint
Peroxid od Platinum vulcanised
Temperature range -60 °C - 200 °C
Mechanical properties are nearly constant over the entire temperature range
silicone led profile
The BIW Silicone LED profiles were developed with the focus on the largest possible light emission area combined with high flexibility. The LED color temperature can be adjusted according to customer requirements.
Below you will find our specially developed LED series from existing tools....
SILICONE VMQ A30 - A80
Platinum vulcanised
Temperature range -60 °C - 200 °C
Mechanical properties are nearly constant over the entire temperature range
Resistant to UV and ozone (resistant to radiation and non-aging)
Excellent compression set
Resistant to many chemicals
Very...
SILICONE VMQ A30 - A80 (250°C/240°C)
Platinum vulcanised
Temperature range -60 °C - 250 °C
Resistant to UV and ozone (resistant to radiation and non-aging)
Excellent compression set
Resistant to many chemicals
Very good fire resistance
No toxic combustion gases
Free of plasticiser
Silicone VMQ A30 - A80 (300°C/280°C)
High-temperature resistant
Platinum vulcanised
Temperature range -60 °C - 300 °C
Resistant to UV and ozone (resistant to radiation and non-aging)
Excellent compression set
Resistant to many chemicals
Very good fire resistance
No toxic combustion...
Silicon VMQ A40 - A80 - antibacterial
Tested antibacterial effect:
With an efficiency of > 99.99% against Staphylococcus Aureus (MRSA) ATCC 33592 according to JIS Z 2801:2010...
Silicone VMQ EA50 - EA70
Electrically conductive
Platinum vulcanised
Temperature range -50 °C - 180 °C
Mechanical properties are nearly constant over the entire temperature range
Resistant to UV and ozone (resistant to radiation and non-aging)
Excellent compression set
Resistant...
Silicone VMQ P10 - P 90 (250°C/240°C)
Peroxide curing
Temperature range -60 °C - 250 °C
With special settings up to -90 °C possible
Resistant to UV and ozone (resistant to radiation and non-aging)
Resistant to many chemicals
Very good fire resistance
No toxic combustion gases
Free of...
Silicone VMQ P10 - P 90 (300°C/280°C)
High Temperature resistant
Peroxide curing
Temperature range -60 °C - 300 °C
With special settings up to -90 °C possible
Resistant to UV and ozone (resistant to radiation and non-aging)
Resistant to many chemicals
Very good fire resistance
No toxic...
Silicone VMQ P10 - P90
Peroxide curing
Temperature range -60 °C - 200 °C
With special settings up to -90 °C possible
Mechanical properties are nearly constant over the entire temperature range
Resistant to UV and ozone (resistant to radiation and non-aging)
Excellent compression...
SILICONE VMQ S030 - S080
Closed-cell structural foam
Temperature range -60 °C - 200 °C
Resistant to UV and ozone (resistant to radiation and non-aging)
Very good fire resistance
No toxic combustion gases
Free of plasticiser
Can be coloured as required...
SILICONE VMQ S030 - S080 (250 °C)
Closed-cell structural foam
Temperature range -60 °C - 250 °C
Resistant to UV and ozone (resistant to radiation and non-aging)
Very good fire resistance
No toxic combustion gases
Free of plasticiser
Can be coloured as required...
SILICONE VMQ S030 - S080 (300 °C)
Closed-cell structural foam
High Temperature resistant
Temperature range -60 °C - 300 °C
Resistant to UV and ozone (resistant to radiation and non-aging)
Very good fire resistance
No toxic combustion gases
Free of plasticiser...
Silicone-special-adhesive-coating SK14
Self-adhesive equipment, strapless with silicone adhesive and a cover of different protective foils possible. The self-adhesive equipment serves as assembly aid. Surfaces must be clean, dry, free of grease and dust. Adheres well to glass surfaces (glass, glazed ceramics, enamelled surfaces, glazed...